CAREGUARD-DM(X) | Oil and Water Repellent

Careguard-DM(X) is water and oil-repelling fluoropolymer based. It confers highly durable water and oil repellency on various substrates viz., polyester, cotton, wool, fibres and their blends. It is environmental friendly. It can be applied by padding, foam and by spray technique.

• Pick-up : 65-70%
• Bath pH : 4.0 - 4.5
• Drying : 100 - 120 deg.C
• Curing : 150 deg.C,5 min. OR 160 deg.C,3 min. OR 170 deg.C, 1 min.

SUGGESTED RECIPE:

For all substrates

• Careguard-DM(X) : 30-80* g/l
• Acetic Acid : 0.5 g/l
• IPA : 5 g/l

* Concentration of Careguard-DM(X) to be taken on the basis of durability requirement.

1. It is recommended to prewash the substrate to be treated with 1 g/l Saragen-DAM at 80-85 deg.C for 20-30 min. to remove traces of residual impurities to get excellent results.
2. After padding and drying if fabric is kept overnight before curing, results will be further improved.
3. Addition of 5-10 g/l Ecolink (Conc)is optional and recommended for achieving higher durability.
4. Water and Oil repellent can be combined with Wrinkle free finish. (Pre-trials are recommended)

Sequence of addition :

• Prepare bath with all ingredients including Saralink-ULF, MgCl2 and Ecolink (Conc) in water containing Acetic acid.
• Stir continuously and add Careguard-DM(X) as the final ingredient.

Precautions:

• Before using our product, stir the product gently and then passing through a filter is advisable before pre-dilution and application
• Avoid high speed and continuous stirring
• Avoid silicone based softeners in the finishing recipe.

Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture.

Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.