Saraprint-AC is a melamine formaldehyde based resin used for finishing of interlining fabrics to impart a durable stiff handle. It is particularly effective for prints taken on knitted, cellulosic fabrics, polyester/cotton, polyester/viscose and polyamides. Addition of Saraprint-AC to a pigment paste enhances its fastness properties especially scrub fastness and wet rubbing fastness.
It is also used for imparting stiff handle to polyester fabrics and its blends.
||Improvement in dry, wet and scrub rub fastness of pigment prints
|Higher dosage gives stiff finish.
||Finishing of cotton inter-lining.
|| Colourless clear liquid
|pH of 1% solution||7 +/- 1
|Miscibility||Miscible with water
||Compatible with anionic, cationic and nonionic products
||Stable to dilute acids & dilute alkalies
1. In pigment printing : 1-3% Saraprint-AC can be added in paste made from either kerosin emulsion or synthetic polymers.
2. Finishing of cotton, polyester, polyamide and their blends 10-30 g/l Saraprint-AC pH 5-6, pick up 60-70% by pad-dry-cure method.
Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.
Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.
The above information is given in good faith and is without warranty