DIGIPRINT-773

DIGIPRINT-773 | Pretreatment auxiliary for digital printing of Polyester and Polyamides

Product Information

Digiprint-773 is a low viscosity economical thickening agent which is applied in pre-treatment padding process before Ink-Jet printing on polyamide and polyester substrates. Digiprint-773 can be easily dosable. Digiprint-773 locally increase the viscosity thereby prevents the spreading of ink. It delivers even prints with sharp outlines and improved colour value on all types of fabric printed with disperse inks. Digiprint-773 does not affect the feel of fabric. It has easy wash-off properties.

Key Features & Benefits
Key Features
Benefits
Ink Jet printing
  • Sharp and even prints
  • Improvement in colour value
Dosable
Easily dosable
Easy wash-off
Does not interfere in subsequent processing
General Characteristics
Physical appearance
Light yellow to yellow gel
Ionic nature Anionic
pH of 1% solution 7 +/-1
Miscibility Miscible with water
Compatibility
Compatible with anionic and nonionic products
Stability
Stable to dilute acids and dilute alkalies
Application

1. Ink-Jet printing on Polyester (Disperse ink)

Pre-treatment (Padding)

  • Digiprint-773 : 40-60 g/l
  • Kitex-BO : 5-10 g/l
  • Sarakol-NF : 1-3 g/l

OR

  • Celldet-R : 0.5-1.0 g/l

Pad -> Dry -> Print (Ink-Jet printing)

Ink-Jet Printing

  • Printing : Ink-jet with disperse ink
  • Steaming : 170-180 deg.C, 6-8 min. OR
  • Thermofix : 180-190 deg.C, 1-2 min. OR
  • Calendering : 200-210 deg.C, 30 sec.

After treatment (Washing)

  • Cold wash : 5 mins
  • Reduction clearing : 0.5-0.75 g/l, Reducon-ACD (Conc) at 3.3-3.7 pH, 60-70 deg.C, 10 mins.

Note :

  • Digiprint-773 can be applied by coating with 50% diluted product.
  • Concentration of Digiprint-773 to be added depending on GSM of fabric. For higher GSM fabric, lesser quantity of Digiprint-773 is required compared to lower GSM fabric.
Precautions

Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture.

Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.

The above information is given in good faith and is without warranty

Related Products

Product Name Short Description Description
DIGIPRINT-458 Pretreatment auxiliary for digital printing of Cellulose and Viscose

It is a coating agent to be applied in the pre-treatment process before Ink-Jet printing specially for cotton and viscose.

SARASOL-1101 Pretreatment auxiliary for digital printing for all types of substrate

A pre-treatment chemical which is applied by padding process before Ink-Jet printing on various substrates.

SARASOL-MB Pre-treatment for Digital Printing of Polyester

A concentrated and economical thickening agent which is applied in the pre-treatment padding process before Ink-Jet printing on polyamide and polyester substrates.