Digiprint-7146(MOD) is a coating agent which is applied on fabric by padding process before Ink-Jet printing especially on cotton, linen, Modal, Tencel and viscose fabrics. Digiprint-7146(MOD) forms surface film on the fabric which allows the ink to get absorbed in it without spreading it. This gives very sharp prints. Digiprint-7146(MOD) delivers level prints with improved color yield. The advantage of Digiprint-7146(MOD) is that it is powder product thus very high stability and gives constant viscosity and pick up compared to liquid product available in the market. Digiprint-7146(MOD) is economical product where only Sodium Carbonate and Super R Salt is required for padding.
|Ink Jet printing
||Improves color yield, levelness & sharpness of prints on Cellulose fabric like cotton viscose/linen/Modal/Tencel/bamboo
||Suitable for reactive inks
||very good wash off properties thus keeps fabric soft
|pH of 1% solution
||Miscible with water
||Compatible with anionic and nonionic products
||Stable to dilute acids and dilute alkalies
|Digiprint-7146(MOD)||30 - 50 g/l|
|Soda ash||5 - 10 g/l|
|Super R Salt||10 - 15 g/l|
Pad and dry at 120 to 130*c
Print the padded dry fabric on ink jet printer with reactive ink
Steaming : 100-102 deg.C, 8-12 min.
After treatment (Washing)
|Cold wash Neutralize with acetic acid||5 mins|
|Soaping||1-2 g/l Sarakol-1583, at 90-95*c deg.C,5 mins.|
|Hot wash||3 mins at 80*c(twice)|
|Cold wash||5 mins.|
For higher GSM fabric, lesser quantity of Digiprint-7146 (MOD) is required compared to lower GSM fabric.
Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture.
Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.
The above information is given in good faith and is without warranty