CAREGUARD-7382 | Oil and Water Repellent

General Characteristics  

Physical appearance	Off white liquid
Ionic nature	Nonionic to weakly cationic
pH of 1% solution	5 +/- 1
Miscibility	Miscible with water
Compatibility	Compatible with cationic and nonionic products
Stability	Stable to dilute acids and dilute alkalies

PADDING PROCESS:

Careguard-7382 : 20-80 g/l

Acetic Acid : 0.5 g/l 

IPA : 5 g/l 

Pick-up : 65-70% 

Bath pH : 4.0 - 4.5 

Drying : 100 - 120 deg.C 

Curing : 150 deg.C,5 min. OR 160 deg.C,3 min. OR 170 deg.C, 1 min. 

* Concentration of Careguard-7382 to be taken on the basis of durability requirement 

Note: 

1. It is recommended to prewash the substrate to be treated with 1 g/l Saragen-DAM at 80-85 deg.C for 20-30 min. to remove traces of residual impurities to get excellent results 
2. After padding and drying if fabric is kept overnight before curing, results will be further improved.
3. Compatible with Flame Retardant finish (Pre-trial is recommended) 
4. Water and Oil repellent can be combined with Wrinkle free finish. (Pre-trials are recommended) 
5. Addition of 5-10g/l Ecolink (Conc)is optional and recommended for achieving higher durability.

Sequence of addition:

• Prepare bath with all ingredients including Saralink-ULF, MgCl2 in water containing Acetic acid 
• Stir continuously and add Careguard-7382 as the final ingredient

Precautions: 

• Before using our product, stir the product gently and then passing through a filter is advisable before pre-dilution and application.
• Avoid high speed and continuous stirring. 
• Avoid silicone based softeners in the finishing recipe.
• Pre trial with Careguard-7382 is recommended with coating chemicals.