ECOGUARD-NEW

ECOGUARD-NEW | Fluorine Free Water Repellent

Product Information

Ecoguard-NEW is a fluorine free speciality product for imparting very good water repellency. Ecoguard-NEW is most suitable on cellulosic substrates and its blends. The performance of Ecoguard-NEW is better than the conventional paraffin wax based products and acrylate based products.

Key Features & Benefits
Key features
Benefits
Biodegradable
Environmental Friendly
Fluorine free
Fulfills requirement of leading retailers viz. M&S and H&M
Works at very low Concentrate
Higher Performance compared to other Durable Water Repellency
Durable to dry cleaning
Different from conventional fluorine free
General Characteristics
Physical appearance
Off white liquid
Ionic nature
Nonionic to weakly cationic
pH of 1% solution
5 +/- 1
Miscibility
Miscible with water  
Compatibility
Compatible with cationic and nonionic products
Stability
Stable to dilute acids and dilute alkalies

Padding Process: 

Ecoguard-NEW   : 30-80 g/l 

Pick-up                : 65-70% 

Bath pH               : 6.0-7.0 

Drying                  : 120 deg.C, 2 min. 

Curing*                 : 145-150 deg.C, 3 min. OR 170 deg.C for 40 sec.  

* In case of polyester, at maximum pick up, curing at temperature 145-150 deg.C gives better spray rating. 

* In case of polyester and P/W fabric it is recommended to wash fabric with 0.5-1 g/l Saragen-DAM before finishing. 

Exhaust process for Garment/fabrics

-----------------------------------

Ecoguard-NEW  : 6-10% 

Bath pH  : 6.0 - 7.0 

Bath Temp.  : R.T. to 40 deg.C, (1 deg.C/min.) 

Time  : 30-40 min. at 40 deg.C 

Drying/Curing  : 110 deg.C, 3 min. / 145-150 deg.C, 3 min. OR 170 deg.C for 40 sec. 


Note
  • Before using our product, stir the product gently and then passing through a filter is advisable before pre-dilution and application
  • Preliminary trials are recommended before bulk processing
  • For higher durability 5-10 g/l of Ecolink (Conc) can be used
  • To get very good results with Ecoguard-NEW, pick up should be more than 70%
  • The minimum 145 deg.C temperature for curing is recommended
  • If results are not upto the mark, then re-curing will help to get better results
  • Ecoguard-NEW is suitable with Deca based FR products but it is not to be used with phosphorous based and APP (Ammonium Phosphophate) based FR products
  • Before finishing with Ecoguard-NEW, bring the fabric temperature to room temperature
Precautions

Storage     :   Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture. 

Shelf Life   :    9 months from the date of manufacturing, if stored under controlled conditions.  

The above information is given in good faith and is without warranty

Related Products

Product Name Short Description Description
CAREGUARD (CONC) Oil and Water Repellent

A water and oil-repelling fluoropolymer based on C6 chemistry for various substrates including Polyester, Cotton, Wool fibres and their blends.

CAREGUARD-FF Fluorine Free Water Repellent

A fluorine free speciality product for water repellency and rain proofing for Cellulosic and its blends.

ECOGUARD-SYN (CONC) Fluorine Free Water Repellent

A fluorine free water repellent especially developed for synthetics and blends. It is also applied on nonwoven substrates.