DIGIPRINT-458

DIGIPRINT-458 | Pretreatment auxiliary for digital printing of Cellulose and Viscose

Product Information

Digiprint-458 is a medium viscosity thickening agent which is applied in the pre-treatment padding process before Ink-Jet printing specially for cotton and viscose fabrics. Digiprint-458 is also suitable for all types of fabrics printed with disperse and reactive. Digiprint-458 locally increases the viscosity thereby prevents spreading of prints. Digiprint-458 delivers level prints with sharp outlines and improved colour value. It has a film forming and adhesion property. The advantage of Digiprint-458 is ready to use product with consistent viscosity. Digiprint-458 is stable as there is no bacterial attack. The feel of the fabric is not affected. It has easy wash-off properties.

Key Features & Benefits
Key Features Benefits
Ink Jet printing
Improves colour yield, levelness & sharpness of prints on cotton, polyester, wool, silk and polyamide fabrics
Universal
Suitable for all types of ink
Easy wash-off
Does not interfere in subsequent processing
General Characteristics
Physical appearance
Light yellow to yellow hazy viscous liquid
Ionic nature Anionic
pH of 1% solution 6 +/-1
Miscibility Miscible with water
Compatibility
Compatible with anionic and nonionic products
Stability
Stable to dilute acids and dilute alkalies
Application

1. Ink-Jet printing on Cotton or Viscose (Reactive ink)

Pre-treatment

  • Digiprint-458 : 60-100 g/l
  • Sarakol-NF : 1-3 g/l
  • Urea : 50-100 g/l
  • Soda ash : 30-40 g/l
  • Super R Salt : 10-15 g/l

Pad -> Dry -> Print (Ink-Jet printing)

Ink-Jet Printing

  • Printing : Ink-Jet with Reactive ink
  • Steaming : 102-105 deg.C, 7-10 min. OR
  • Thermofix : 140-150 deg.C, 3-5 min.

After treatment (Washing)

  • Cold wash : 5 mins
  • Soaping : 1-2 g/l Sarakol-1583, 98 deg.C,5 mins.(twice)
  • Hot wash : 3 mins at boil (twice)
  • Cold wash : 5 mins.

2. Ink-Jet printing on Polyester (Disperse ink)

Pre-treatment (Padding)

  • Digiprint-458 : 50-80 g/l
  • Sarakol-NF : 1-3 g/l
  • Kitex-BO : 5-10 g/l

Pad -> Dry -> Print (Ink-jet printing)

Ink-Jet Printing

  • Printing : Ink-jet with disperse ink
  • Steaming : 170-180 deg.C, 6-8 min. OR
  • Thermofix : 180-190 deg.C, 1-2 min. OR
  • Calendering : 200-210 deg.C, 30 sec.

After-treatment (washing)

  • Cold wash : 5 mins.
  • Reduction clearing: 0.5-0.75 g/l, Reducon-ACD (Conc) at 3.3-3.7 pH, 60-70 deg.C, 10 mins.

Note :

  • Digiprint-458 can be applied by coating with 50% diluted product.
  • Concentration of Digiprint-458 to be added depending on GSM of fabric. For higher GSM fabric, lesser quantity of Digiprint-458 is required compared to lower GSM fabric.
Precautions

Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture.

Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.

The above information is given in good faith and is without warranty

Related Products

Product Name Short Description Description
SARASOL-1101 Pretreatment auxiliary for digital printing for all types of substrate

A pre-treatment chemical which is applied by padding process before Ink-Jet printing on various substrates.

SARASOL-MB Pre-treatment for Digital Printing of Polyester

A concentrated and economical thickening agent which is applied in the pre-treatment padding process before Ink-Jet printing on polyamide and polyester substrates.