Sarasil-JS is a silicone based defoamer suitable for all textile wet processing operations, where foam control is essential. It can be used in jets, overflow dyeing machines, package dyeing machines, winches, jiggers and in print paste. Sarasil-JS does not lead to any objectionable deposits on equipments or substrates due to its high stability.
|Stable to alkaline pH, high temperature
|Suitable for pretreatment & dyeing of cotton.
Can be added in chemical padding to avoid foam marks in continuous dyeing with vat dyes
|Suitable for jet, soft flow machines and package dyeing machines
|Does not lead to silicone spots
|Milky to creamish white viscous liquid
|pH of 1% solution
|8 +/- 1
|Miscible with water
|Compatible with anionic and nonionic products
|Stable to dilute acids and dilute alkalies
Sarasil-JS is stable to high alkaline pH and at elevated temperature. Depending upon the requirement 0.5-1.0 g/l Sarasil-JS can be used.
1. Sarasil-JS is a surfactant free dispersion, stabilised with protective colloids and hence its dispersions appears non-homogeneous. However, such products should ideally not diluted to stock solutions, but diluted immediately before use.
2. For preparing stock solution small quantity of Xanthan gum (0.3-0.4% on weight of stock solution) or synthetic thickener is recommended.
3. Sarasil-JS is not advisable to use in high temperature /high pressure machines and hence cannot be used in polyester dyeing.
Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.
Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.
The above information is given in good faith and is without warranty