YARNSOFT-FRS (CONC) | Yarn lubricating agent

Yarnsoft-FRS (Conc) is a concentrated lubricating agent for finishing of cotton, polyester filament, spun polyester and polyester / cellulosic yarn. Yarnsoft-FRS (Conc) imparts very good lubricity and gliding properties to the pretreated yarns which exhibit very low friction values. Yarnsoft-FRS (Conc) also imparts antistatic properties. Yarnsoft-FRS (Conc) is stable to heat and shows very low emission particularly for automotive textiles.

Exhaust process:

• Dosage* : 0.3-1.0%
• Bath pH : 5.0-6.0
• Bath Temp. : 30-60 deg.C
• Time : 10-20 mins.

We recommend the in-out cycle of 3 mins. and reverse the cycle of 5 mins. for uniform absorption within the package.

* Dosages recommended are based on the concentrated product's strength.

  Dosages of diluted product to be calculated on the basis of solid content.

Instructions For Dilution

Procedure to prepare 20% diluted product of 70% Yarnsoft-FRS (Conc)

Method-I

• Take 71.5 part water in a vessel
• To it add 28.5 parts of product slowly under stirring at 2000-3000 rpm using turbo stirrer.
• Continue stirring for 20-30 min. at 2000-3000 rpm till homogeneous product is formed.

Method-II

• Take 28.5 Kg products in a vessel.
• To it add 71.5 Kg water under stirring at 150-200 rpm
• Continue stirring for 20-30 min. until a homogeneous product is formed.

Preservation: It is recommended to add 0.1% Bronopol (2-Bromo,2-nitropropane, 1,3-diol) or Methyl Paraben (methyl para hydroxy benzoate) as an antimicrobial agent to avoid fungal / microbial growth.

• Un-dissolved particles if any can be filtered off (filter through nylon filter cloth of 200-250 mesh size).
• Diluted product should not be stored for longer time.
• Stir well before use, as diluted product has tendency to separate.
• It is advisable to utilize the diluted product within 2 months.