FABCOAT-WB | Water Based PU Coating

Fabcoat-WB is a PU base coating, recommended as a coating compound for outdoor fabrics like cordura. It forms a clear and tack free films with high water coloumn. To obtain high water column, two coating of Fabcoat-WB is recommended. Fabcoat-WB is ready to use coating compound but the viscosity of the product can be decreased by adding water.

• Pre-impregnation with flourocarbon is recommended before coating
• Fabcoat-WB can be applied by knife on air
• To realise high water column 2 layers of Fabcoat-WB is recommended
• First coat is to be dried at 100-120 deg.C, followed by hot calendaring at 60-80 deg.C
• Same procedure should be done for second layer
• For achieving high add-on, Fabcoat-WB should be coated in 2 pass
• Curing should be done at 160 deg.C for 3 min.
• In case of high water repellency requirement, the fabric must be post impregnated with flourine containing water repellent

Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.

Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.