Oligomer Remover and Machine Cleaner
Polyester contain different types of oligomers which do not pick up dye during dyeing. These oligomers gets deposited on the surface of Polyester as white powder after dyeing. Adding Eliminator-GLO these oligomers dissolve during dyeing and do not deposit on polyester gives even dyeing without powder deposits. Eliminator-GLO is used in Fibre, Yarn, Package, Fabric dyeing process to overcome white powder deposite on Polyester. Use of Eliminator-GLO in dyeing leads to improved washing faster and level dyeing Eliminator-GLO when used in fibre dyeing it improves the performance of combing in spinning. Use of Eliminator-GLO in machine cleaning removes white deposits from machine walls.
| Key Features | Benefits |
|---|---|
| Reduces deposits caused by oligomer and dye precipitations on fabric/machine
|
Keeps machine clean and uniform, level dyeing obtained
|
| Allows for reliable, good rewinding of yarns
|
Improves the combing quality of stock-dyed material
|
| Physical appearance
|
Light yellow to yellowish brown liquid
|
| Ionic nature | Anionic
|
| pH of 1% solution | 7 +/- 1
|
| Miscibility | Miscible with water
|
| Compatibility | Compatible with anionic, cationic and nonionic products
|
| Stability
|
Stable up to 500 ppm CaCO3, stable to dilute acids and dilute alkalies
|
1. Use of Eliminator GLO in Dyeing:
|
|
Disperse-Dye
|
As per recipe
|
| (Dispersing Agent)
|
Saragen-SO
|
0.5%
|
| (Levelling Agent) | Dyewell-002
|
0.5 - 0.75%
|
|
|
Eliminator-GLO
|
1 - 3%
|
Carry out polyester dyeing at 130 – 135 degree for 40 – 45 mins. Cool and drain out and carry out further process.
| Shade depth
|
Recommended dosage(g/L)
|
|---|---|
| Upto 1 | 1 |
| 2-3 | 2.5 |
| 3-5 | 3 |
| Very dark shade | 4 |
2. Machine Cleaning:
i) Recipe:- Eliminator-GLO - 1 – 1.5 g/L
Caustic solid - 1 – 2 g/L
Sodium Hydro Sulphite - 2 g/L
Fill machine with water & above chemicals at raise temperature to 130 degree & run for 20 to 30 mins. Coot it to 80 degree and drain. This purpose nill remove oligomer deposite and any disperse dye from the machine.
ii) Recipe:- Eliminator-GLO - 1 – 1.5 g/L
Saragen-so - 0.5 g/L
Fill machine with water & above chemicals. Raise temperature to 130 degree and run for 20-30 mins. Drain the batch at high temperature between 110 degree to 120 degree which will remove all oligomer deposites (white powder) stuck on the walls of machine.
Instructions For Dilution
Mix 1 part Eliminator-GLO liquid with 5 parts warm water (60 deg.C - 70 deg.C) properly and before addition of dye.
Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.
Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.
The above information is given in good faith and is without warranty
