SARALUBE-2975 | Tear strength improver

Product Information

Saralube-2975 is a special finishing chemical to improve the tear strength of the woven and knitted fabrics. Incorporation of Saralube-2975 in the normal finishing bath as well as in resin finishing bath improves tear strength without affecting the handle. It imparts soft and waxy handle to finished fabric. Saralube-2975 does not affect whiteness or brightness of the shades. Saralube-2975 can also be used in fluorocarbon finishing without any effect on performance of flurochemical for stain and water repellency. Saralube-2975 can be applied by exhaust as well as pad application.

Key Features & Benefits
Key Features Benefits
Improves tear strength
Can be added in critical qualities in normal finishing and resin finishing
Does not affect whiteness or brightness
Compatible with flurochemicals
 Tear strength can be improved even with stain and water repellent finish
General Characteristics
Physical appearance
Off-white to creamish liquid
Ionic nature Nonionic
pH of 1% solution 9 +/- 1
Miscibility Miscible with water
Compatibility Compatible with cationic, anionic and nonionic products
Stable to dilute acids and dilute alkalies

Pad application :

30-60 g/l Saralube-2975 is recommended in usual finishing recipes including resin finish and flurochemical finish.

Exhaust application :

3-6% Saralube-2975

pH : 5-6, Temp : 35-40 deg.C, treat for 20-30 min.

Note :

In order to prevent film formation or drying of Saralube-2975 at the top, the container should be immediately closed tightly after use.


Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture.

Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.

The above information is given in good faith and is without warranty