Sarafast TR LIQ | UV Absorber for polyester

1. PRODUCT NAME & DETAILS
Product Name Sarafast TR LIQ

2. Product Information 

  • Sarafast TR Liq.is a Triazine based dispersion, suitable for High Temperature Exhaust Application, printing and continuous pad-thermosol  application.  
  • It suitable for Dyeing and printing of polyester Fibres, modified polyester Fibres and their blends that areexposed to critical light and heat conditions. 
  • Sarafast TR Liq.provide outstanding stability against heat and light.
3. Key Features & Benefits

UV absorber

Reduces fibre damage

Triazine chemistry:Triazine chemistry is undeniably a cornerstone of modern industrial advancements, known for best UV stability.

Counteracts photochemical Fibre and dye degradation, especially on long-term exposure to light and heat  

Outstandingly stable to heat and light.

Safe fulfillment of light fastness requirements even after post-setting and molding processes. Fast to sublimation, no tendency to fogging.

Highest extinction rates over a wide range of UV rays.

Full absorption of UV rays hence maximum light fastness, functionality and stability of PES Fibres

Highly Exhaustible

In exhaust dyeing processes, the product is completely picked up by the polyester material and builds-up to a high level of UV absorption - thus showing a high efficiency in reduce colour fading.

Stable to alkaline conditions.

Suitable for dyeing in alkaline conditions as well as alkaline discharge printing processes.

Low viscosity and good storage stability.

Pumpable and easy to handle. Suitable for container transport and storage.

Fine particle size with remarkable dispersion stability properties.

Homogeneous dispersion, even at a high heating rate and under unfavorable dyeing conditions like package dyeing.

Good dispersion stability and low foaming

Suitable by exhaust method in soft flow, package & jet dying machine 

4. General Characteristics  

Physical appearance                  :   White, Low viscosity dispersion 

Chemical Constitution                :    Dispresant- containing Triazine derivative

Ionic nature                                :    Non-ionic 

pH of 1% solution                      :     6.6 to 8 

Specific Gravity at 20C              :    1.05 g/cm3  

Miscibility                                   :    Dispersible with water 

Compatibility                              :    Compatible anionic and non-ionic products 

Stability                                      :    Stable in hard water to acids and alkalies, pH values 4 to 10

5. Application

Sarafast TR Liq is used for dyeing and printing textile made from Polyester Fibres, modified Polyester Fibres and their blends that are exposed to extreme light influence.   Sarafast AS Liq is water dispersion UV absorber for polyester fibber and blends . it can be applied during dying and printing of polyester fabrics by exhaust and thermosol process. Stir well before removal from the container

1. Exhaust application during polyester dyeing with disperse dyes

  • Dosage : 2-4 %(on weight of the fabric) 

2. Thermosol pad application 

  • Dosage : 20-50  g/l(50-60% liquor pick-up)

6. Note

  • Sarafast TR Liq. can be applied in presence of carrier, however the carrier residues may impair the light fastness properties of fabric.
  • The effects attainable depend on the type of polyester Fibre (texture, amount of delustrant, denier and cross section), the dyes used and the individual shade.
  • Sarafast TR Liq. shows a slightly yellow self-shade in printing and pad-thermosol application. Certain bright shades might be impaired by this whereas on trichromatic systems it could minimize the fading of the yellow component. 

7. Precautions

Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not   exceed 35 deg C. Close lids firmly to avoid contact with air and moisture. 

Shelf Life : 12 months from the date of manufacturing, if stored under controlled conditions. 

Packing: 50 kg, 200 kg HDPE Drum 

Disclaimer
Typical properties should not be considered as specification.
Product covered by valid patents are not offered or supplied for commercial use. The Patent position should be verified by the customer.
Products will not be supplied to countries where they could be in conflict with existing patents.
Products currently covered by valid US patents are offered for R&D use in accordance with 35 USC 271 (e) (I) Above information is given in good faith and without warrenty.

The above information is given in good faith and is without warranty