|2. PRODUCT NAME & DETAILS|
|Product Name||2,4-Bis(2,4-dimethylphenyl)-6-(2-hydroxy-4-octyloxyphenyl)-1,3,5-triazine (Appolo-1164)|
|Synonyms||UV absorber 1164, 2-[4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl]-5-octoxyphenol, UV 1164|
|3. REGULATORY INFORMATION
||Common names and synonyms
|2,4-Bis(2,4-dimethylphenyl) -6-(2-hydroxy-4-n-octyloxyphenyl) -1,3,5-triazine
|European Inventory of Existing Commercial Chemical Substances (EINECS)
|United States Toxic Substances Control Act (TSCA) Inventory
|China Catalog of Hazardous chemicals 2015
|Chinese Chemical Inventory of Existing Chemical Substances (China IECSC)
|Korea Existing Chemicals List (KECL)
|Canadian Domestic Substance List (DSL)
|Canadian Non-Domestic Substance List (NDSL)
|Japanese Existing and New Chemical Substances Inventory(ENCS)
||Off White to Yellowish Powder
|Solubility (5% In Toluene)
||Clear Light Yellow Solution
||90.0 to 92.0°C
|Transmittance (%) 460 NM
|Transmittance (%) 500 NM
|Purity By HPLC
|5. ANGLE OF REPOSE||48.6°|
|6. TGA Curve|
||-UV Absorber 1164 is widely used as a light stabilizer (UV-absorber) for all kinds of polymers.
- Polymers are predominantly polyolefins, styrenics, ABS, polyamides, polyesters and polyacrylates. Can also be used in PVC, PUR, rubbers, a.o.
- It shows excellent compatibility with other stabilizer chemistries.
- Used in products to protect them from long-term degradation from the effects of UV exposure.
- Minimal color contribution.
- It also show low interaction with metals. UV 1164 has a very low volatility.
- Main applications are: Greenhouse films, Industrial films, PP and PE thick cross sections articles used in construction. Polyethylene sheets used for agriculture / Greenhouse films. It easily substitutes all benzotriazole and benzophenone based UV absorbers
|8. APPOLO-1164 : SPECTRAL TRANSMISSION
|9. FOOD APPROVAL STATUS (FOR PLASTIC COMING IN CONTACT WITH FOOD) CAS NO.2725-22-6 HAS USA (FDA), EUROPE, JAPAN APPROVAL.
|I. In USA according to FDA 21 CFR part section 178.2010|
At levels not to exceed 0.3 percent by weight of olefin polymers complying with 177.1520(c) of this chapter in contact with food types I, II, IV-B, VI, VII-B, and VIII described in 176.170(c) of this chapter, table 1, under conditions of use D through G as described in 176.170(c), table 2, of this chapter.
|B. At levels not to exceed 0.1 percent by weight of polypropylene complying with 177.1520(c) of this chapter, items 1.1a, 1.2, and 1.3 in contact with food under conditions of use A through H as described in 176.170(c), table 2, of this chapter.
|C. At levels not to exceed 0.04 percent by weight of polyethylene and olefin copolymers complying with 177.1520(c) of this chapter, items 2.1, 2.2, 2.3, 3.1a, 3.1b, 3.1c, 3.2a, and 3.2b having a minimum density of 0.94 gram per cubic centimeter, in contact with food under conditions of use A through H as described in 176.170, table 2, of this chapter provided that the finished articles used in contact with fatty food types III, IV-A, V, VII-A, and IX as described in table 1 of 176.170(c) of this chapter hold a minimum of 2 gallons (7.6 liters) of food.
|D. At levels not to exceed 0.4 percent by weight of ethylene copolymers complying with 177.1520(c) of this chapter, items 3.1a, 3.1b, 3.1c, 3.2a, and 3.2b, having a density of less than 0.94 gram per cubic centimeter, in contact with food under conditions of use B through H, as described in 176.170(c), table 2, of this chapter provided that the finished articles used in contact with fatty food types III, IV-A, V, VII-A, and IX hold a minimum of 5 gallons (18.9 liters) of food.
|E. At levels not to exceed 0.04 percent by weight of polyethylene having a density of less than 0.94 gram per cubic centimeter, and olefin polymers complying with 177.1520(c) of this chapter, items 2.1, 2.2, 2.3, 3.3a, 3.3b, 3.4, 3.5, 3.6, 4, 5, and 6, in contact with food under conditions of use D through G as described in 176.170(c) of this chapter, table 2, provided that the finished articles used in contact with fatty food types III, IV-A, V, VII-A, and IX hold a minimum of 5 gallons (18.9 liters) of food.
|II. Europe Approval|
|A. Appolo-1164 with CAS no. 2725-22-6 is registered under Ref. no. 38885 and has a SML=5 mg/kg
|III. Food Contact Positive Lists of substances allowed for use in food contact materials (FCMs) by Japan's Ministry of Health, Labour and Welfare (MHLW) issued on April 28th, 2020 and effective on June 1st, 2020|
|Apollo-1164 with CAS No 2725-22-6 is listed in Positive List of Additives, coatings etc. (Table 2) with below information on the restriction of use by synthetic resin category under Ref no. 315 & Sr. No. 1185.
Use Limit Synthetic Resin Group 2, Group 3 , Group 5, Group 6 with each 0.3%
A. Not allowed to be used in the parts coming into contact with fat/oil and fatty/oily food.
B. Not allowed to be used in the parts coming into contact with food at over 100°C.
|10. HAZARD CLASSIFICATION
|11. ANNUAL CAPACITY
|12. STORAGE CONDITION
||Stored in closed container at ambient temperature. Avoid direct sunlight.
|13. PACKING DETAILS
||Corrugated Boxes (7 Ply)
Net Quantity per box = 15 kgs
Inner Packing double plastic liner inside
27 boxes can be placed on wooden pallet (ISPM 15) in 4 tier
9 Boxes in one tier x 4 tier = 36 Boxes
Total quantity per pallet = 36 X 15kg= 540kgs
540kgs x 4 pallets = 2160 kgs
|14. SHELF LIFE
|Typical properties should not be considered as specification.
Product covered by valid patents are not offered or supplied for commercial use. The Patent position should be verified by the customer.
Products will not be supplied to countries where they could be in conflict with existing patents.
Products currently covered by valid US patents are offered for R&D use in accordance with 35 USC 271 (e) (I) Above information is given in good faith and without warrenty.
The above information is given in good faith and is without warranty
CAS No. 106556-36-9
CAS No. 1440-00-2
CAS No. 3842-55-5
UV Absorber & Light Stablizer additive
CAS No. 1820-28-6
UV Absorbers & Light Stabilizer additive
CAS No. 876-57-3
CAS No. 6390-69-8
Frequently Asked Questions
What is the application of UV-1164?
It is used as UV light absorber and high inherent UV stabilizer in other polymer.
What is the packing of UV-1164?
Packing of Appolo-1164 is Corrugates Box for 20kg, on one pallet 27 Boxes x 20kg = 540kg. Also we packed bulk quantity in 250kg in Big Jumbo Bag.
What is the Self Life of UV-1164?
Self life is 3 year from the date of manufacturing
Is UV-1164 Hazardous OR Non-Hazardous substances?
It is Non - Hazardous substances.
What is the Volatility of UV-1164?
Appolo-1164 is very low volatility substance. Volatility at 380 degree C is 5 % and at 405 degree C is 10 %
Do you have Reach Registration of this product.
Yes, We have Reach Registration of this product 10MT P.A.