ECOGUARD-SR 6

ECOGUARD-SR 6 | Stain Release

Product Information

Ecoguard-SR 6 is a new generation stain releasing fluorocarbon based on C6 chemistry. It imparts very good stain release properties on cotton, polyester and their blends. It also imparts oil and water repellency. The finish on substrate allow the stains to leave fabric faster and makes the fabric clean. Treated fabric is durable to multiple home launderings.

Key Features & Benefits
Key Features Benefits
Performance
Excellent stain release coupled with oil and water repellency
Eco-friendly
PFOA below detectable limit
Durable
Good stain release property even after multiple home laundering
Feel
Does not impair breathability and handle of the fabric
Non-yellowing
Suitable for white and pastel shades
General Characteristics
Physical appearance
Off white liquid
Ionic nature Nonionic to weakly cationic
pH of 1% solution
5 +/- 1
Miscibility
Miscible with water
Compatibility
Compatible with nonionic and cationic products
Stability
Stable to dilute acids and dilute alkalies
Application

Padding process

  • Pick-up : 65-70%
  • Bath pH : 4.5-5.0
  • Drying : 110-130 deg.C
  • Curing : 160-170 deg.C, 2-3 min.

SUGGESTED RECIPES:

1. 100% Cotton

  • Ecoguard-SR 6 : 30-50*g/
  • Saralink-ULF : 30 g/l (optional)
  • MgCl2** : 6 g/l
  • Saralube-2975 : 20 g/l (optional)
  • IPA : 5 g/l
  • Ecolink (Conc) : 5-8 g/l
  • Acetic acid : 1-2 g/l

2. Polyester/Cellulosic blend

  • Ecoguard-SR 6 : 20-40*g/l
  • Saralink-ULF : 20 g/l (optional)
  • MgCl2** : 4 g/l
  • Saralube-2975 : 20 g/l (optional)
  • IPA : 5 g/l
  • Ecolink (Conc) : 3-4 g/l
  • Acetic acid : 1-2 g/l

3. 100% Polyester

  • Ecoguard-SR 6 : 20-40*g/l
  • Saralube-2975 : 20 g/l (optional)
  • IPA : 4 g/l
  • Ecolink (Conc) : 3-4 g/l
  • Acetic acid : 1-2 g/l

* Concentration of Ecoguard-SR 6 to be taken on the basis of durability requirement.

** If Saralink-ULF is added in the recipe then only MgCl2 to be added.

Note:
  1. It is recommended to prewash the substrate to be treated with 1 g/l Saragen-DAM at 80-85 deg.C for 20-30 min. to remove traces of residual impurities to get excellent results.
  2. Ecolink (Conc) is an extender, addition of which improves fastness to washing and resistance to abrasion.

Sequence of addition:

  • Prepare bath with all ingredients including Saralink-ULF MgCl2 and Ecolink (Conc) in water containing Acetic acid
  • Stir continuously and add Ecoguard-SR 6 as the final ingredient.

Precautions :

  • Avoid high speed and continuous stirring.
  • Avoid silicone based softeners in the finishing recipe.
Precautions

Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.

Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.

The above information is given in good faith and is without warranty

Related Products

Product Name Short Description Description
CAREGUARD (CONC..) Oil and Water Repellent

A water and oil-repelling fluoropolymer based on C6 chemistry for various substrates including Polyester, Cotton, Wool fibres and their blends.

CAREGUARD-314 Oil and Water Repellent for Synthetics

A new generation water and oil repelling fluorocarbon based on C6 Chemistry which imparts best results on polyamide fabrics. It also gives alcohol and blood repellency and thus can be used for application on Personal Protective Equipment/ Clothing (PPE) used in medical and industrial textiles.

CAREGUARD-541 Oil and Water Repellent

Careguard-541 is a new generation cost effective water and oil repelling fluorocarbon based on C6 Chemistry. It imparts durable water and oil repelling effects on various substrates viz., polyester, cotton, nylon, wool fibres and their blends without affecting the original hand of fabric. It can be applied by padding foam and by spray technique.

CAREGUARD-66 (NEW) Oil and Water Repellent

A new generation water and oil repellent fluorocarbon based on C6 Chemistry, imparts durable water and oil repellency and also alcohol and blood repellency on cellulosic substrates and blends. Careguard-66 (NEW) is suitable for application on Personal Protective Equipment/ Clothing (PPE) used in medical and industrial textiles.

CAREGUARD-6NI Oil and Water Repellent

A new generation cost effective water and oil repelling fluorocarbon based on C6 Chemistry. It imparts durable water and oil repelling effects on various substrates including Polyester, cotton, Nylon, Wool fibres and their blends.

CAREGUARD-DM(X) Oil and Water Repellent

A water and oil-repelling fluoropolymer based on C6 chemistry. It confers highly durable water and oil repellency on various substrates like Polyester, Cotton, Wool fibres and their blends.

CAREGUARD-FF. Fluorine Free Water Repellent

A fluorine free speciality product for water repellency and rain proofing for Cellulosic and its blends.

CAREGUARD-SV Oil and Water Repellent

A new generation highly cost effective water and oil repellent fluorocarbon based on C6 Chemistry. It imparts balanced water and oil repellency on various substrates for Polyester, Cotton, Nylon, Wool fibres and their blends.

CROSSLINK-SC (CONC). Fluorocarbon Extenders

Concentrated extender for oil & water repellent finishing agent

ECOGUARD-EF Fluorine Free Water Repellent

A fluorine free speciality product for water repellency and rain proofing for cellulosic and its blend

ECOGUARD-SYN (CONC) Fluorine Free Water Repellent

A fluorine free water repellent especially developed for synthetics and blends. It is also applied on nonwoven substrates.