501 Waterford, C Wing, C.D.Barfiwala Marg,
Juhu Lane, Andheri W, Mumbai 400 058, INDIA.
Phone: +91 22 42184218 • Fax: +91 22 42184350
Email: tcexp@sarex.com | tcexn@sarex.com
Biopol-Combi is an innovative multicomponent enzyme which is effective for peroxide killing and biopolishing in one stage operation. Biopol-Combi can be used for cellulosic fabric and its blends. Biopol-Combi does not show strength loss or shade changes. Biopol-Combi shortens the processing time.
As it is a neutral cellulase enzyme it will ensure a higher degree of whiteness than expected acid cellulases for full white fabric.
The product to be used in soft flow machine and garment dyeing machine.
| Key Features | Benefits |
|---|---|
| Multi compoment enzyme | Peroxide killing and bio-polishing can be carried out after bleaching in the same bath |
| Controlled action | No shade change in dyed material or strength loss |
| pH stable | Applied at wide pH |
| Economical | Saving in water, time and energy |
| No stripping of optical brightness like acid cellulase | Retain brightness of full whites |
| Eliminates residual peroxide | No shade changes during dyeing |
| Stable to anionic auxillaries & salt ( sodium sulphate/sodium chloride ) | Can be used during dyeing |
| Physical appearance | Yellow to yellowish brown liquid |
| Ionic nature | Non-ionic |
| pH of 1% solution | 6 +/- 1 |
| Miscibility | Miscible with water |
| Stability | Stable to dilute acids and dilute alkalies |
| Compatibility | Not compatible with strong cationic products or anionic products |
| Equipment | Jet dyeing machine or garment dyeing machine. |
| Biopol-N | 0.8-1.5% ( depending on requirement ) |
| pH | 5.0-6.5 |
| Temperature | 45-60 deg.C |
| Treatment time | 60-75 mins |
Check H2O2 residue after 15-20 min. Confirm that it should be nil and follow dyeing as per customer's dyeing procedure. During exhaustion of dye bio-polishing will be also simultaneously taken place for 50-60 min. At the end of 50-60 min, alkali to be added where enzyme gets deactivated and dye get fixed to the substrate or can be deactivated by increasing the temperature to 80 deg.C for 10 mins.
| Storage | Store in cool, ventilated shed away from heat and direct sunlight.Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture. |
| Shelf Life | 8 months from the date of manufacturing, if stored under controlled conditions. |