501 Waterford, C Wing, C.D.Barfiwala Marg,

Juhu Lane, Andheri W, Mumbai 400 058, INDIA.


Phone: +91 22 42184218 • Fax: +91 22 42184350

Email: tcexp@sarex.com | tcexn@sarex.com

PRODUCT LITERATURE


BIOFEEL-PST | Biopolishing Enzyme | Biopolish


Product Information


Biofeel-PST is an economical & highly active acid cellulase enzyme for biopolishing of cellulosics and polyester/cellulosic blends. The product is applicable for garment dyeing machine and jet dyeing machine where suitable mechanical action is provided which enhances the action of Biofeel-PST. It is also suitable for colour fading for denim garments and biopolishing of knits, fabrics & terry towels. Biofeel-PST gives very good performance on scoured or grey fabric after treatment with wetting agent. To avoid excess strength loss of garments and materials after biopolishing,it is recommended deactiviation of Biofeel-PST after the treatment.

Key Features & Benefits


Key Features Benefits
Cost-effective Requires lower dosage
Controlled action Minimum shade change in dyed material and minimum strength loss.
Fabric becomes softer and new look Removes protruding fibres from surface and prevents from pilling
Saving in water and time Peroxide elimination and biopolishing can be carried out without draining the bath

General Characteristics


Physical appearance Medium to dark amber, slight viscous liquid
Ionic nature Nonionic
pH of 1% solution 5 +/- 1
Miscibility Miscible with water
Stability Stable to dilute acids & dilute alkalies
Compatibility Compatible with nonionic products but not compatible with strong cationic or anionic products.

Application


  1. For Biopolishing of cottons and blends in exhaust after pretreatment:
    Biofeel-PST 0.6%-1%
    pH 4.7-5.5
    Temperature 50-60 deg.C
    Treatment time 45-60 min

    Dosage should be based on cotton component only


Note :


  1. First pH of water to be adjusted to 4.7-5.5 and then Biofeel-PST to be added.

  2. After biopolishing treatment, raise the temperature to 80 deg.C for 10 min. or adjust pH to 10 to terminate action of enzyme. The material can then be finished using chemicals finishes as usual.

  3. pH of fabric should be neutral and free from residual peroxide

  4. Combined biopolishing and peroxide elimination can be carried out for cotton knits and terry towels prior to reactive dyeing. Biopolishing is usually recommended before cationic dye-fixation or cationic softening or optical brightening agent.

  5. Absorbency of fabric/garment should be good.

Precautions

Storage Store in cool, ventilated shed away from heat and direct sunlight.Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.
Shelf Life 8 months from the date of manufacturing, if stored under controlled conditions