501 Waterford, C Wing, C.D.Barfiwala Marg,
Juhu Lane, Andheri W, Mumbai 400 058, INDIA.
Phone: +91 22 42184218 • Fax: +91 22 42184350
Email: tcexp@sarex.com | tcexn@sarex.com
Anticrease (Conc) is a Lubricating agent, Crease preventing and Anti creasing agent for natural & synthetic fibres & their blends. The product is recommended for all types of materials which are processed at low liquor ratio on machines with high shear forces in order to prevent the chaffing and crease marks. Due to its chemical nature, the product can be used in all stages of processing. It forms a thin, uniform, protective coating around the fibre to lower the surface friction and flexural rigidity, thus minimizing the formation of durable creases during high temperature wet processing of polyester.
| Key Features | Benefits |
|---|---|
| Concentrated | Economical |
| Versatile | Suitable for pretreatment, dyeing of cotton, polyester and their blends |
| Highly efficient | Prevents chaffing or crease marks during processing |
| Prevents metal to fibre frction | Uniform dyeing in combinaton with phthalocyanine types of dye. |
| Physical appearance | White granules |
| Ionic nature | Anionic |
| pH of 1% solution | 7.5 +/- 1 |
| Miscibility | Soluble in water with vigorous stirring or soaking overnight |
| Stability | Stable to dilute acids and dilute alkalis |
| Compatibility | Compatible with nonionic and anionic products |
Exhaust application:
Depending upon the fabric type i.e.construction, weave pattern and fabric weight, 0.2-0.5 g/l of diluted Anticrease (Conc) is recommended.
Note:
Fill water in the machine. Add Celldet-R followed by addition of Anticrease (Conc). Load fabric at 50 rpm speed (30% rpm of original rpm of running batch). Run for 10 minutes (3 cycles) and then add bleaching auxiliaries.
It is advisable to use Anticrease (Conc) at a maximum temperature of 99 deg.C and not beyond.
Best method for Dilution
Soak Anticrease (Conc) in DM water for 12-16 hrs
After 12-16 hrs, stir the soaked Anticrease (Conc) at a very low rpm (50-100 rpm) OR hand stirring for homogenization.
Filter/strain finished product through 200-250 mesh nylon filter cloth to remove un-dissolved particles/lumps if any.
Quick method for Dilution
Take 98.5 parts DM water (60-70 deg.C)
To this, add 1.5 parts of Anticrease (Conc) under constant stirring at 150-200 rpm.
Add the required quantity of Anticrease (Conc) slowly over a period of 45-60 min.
Continue stirring by maintaining the temperature for additional 90 minutes.
Allow to age for 2-3 hours.
Filter the solution to remove un-dissolved particles/lumps if any.
Preservation: It is recommended to add 0.1% Bronopol (2-Bromo,2-nitropropane, 1,3-diol) or Methyl Paraben (methyl para hydroxy benzoate) as an antimicrobial agent to avoid fungal / microbial growth.
| Storage | Store in cool, ventilated shed away from heat and direct sunlight.Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture. |
| Shelf Life | 8 months from the date of manufacturing, if stored under controlled conditions. |