ZOROFAST-FMD (CONC).

ZOROFAST-FMD (CONC). | Concentrated Wet Rubbing Fastness Improver

Product Information

Zorofast-FMD (Conc) is a speciality finishing agent to improve dry and wet rub fastness of all types of dyed and printed cotton and their blends. It is compatible with certain cationic and nonionic silicone finishing agents. It can be applied by both dry-on-wet and wet-on-wet application. Zorofast-FMD (Conc) comply with the eco parameters.

Key Features & Benefits
Key Features Benefits
Excellent improvement in wet rub fastness by padding
Improves by 1.5-2.0 units on direct reactive, sulphur,indigo and pigment dyed fabrics
Does not contain harmful solvents
Comply with the eco parameters
General Characteristics
Physical appearance
Yellow liquid
Ionic nature Cationic
pH of 1% solution 5 +/- 1
Miscibility Miscible with water
Compatibility
Compatible with cationic and nonionic products
Stability
Stable to dilute acids and unstable to dilute alkalies
Application

Padding method:

Preparation of padding bath with Zorofast-FMD (Conc)

  • Take 0.3-0.6 g/l acetic acid
  • To this add required quantity of Zorofast-FMD (Conc) (15-20 g/l) and mix it uniformly.
  • Make the total volume with water (pH 5.8-6.2)
  • Mix well to get uniform solution
  • Solution of 15-20 g/l Zorofast-FMD (Conc) will appear slight hazy and turbid with pH 3.7-4.2

Pad -> Dry at 130-160 deg.C

Exhaust method - Zorofast-FMD (Conc). in Garment: 

Step wise procedure for preparing Zorofast-FMD (Conc) solution

  • Take 0.3-0.6 g/l acetic acid
  • To this add required quantity of Zorofast-FMD (Conc) (1.5-3% on weight of garment) and mix it uniformly
  • Make the total volume with water (pH 5.8-6.2) mix it uniformly
  • Mix well to get uniform solution
  • Solution of 1.3-5% Zorofast-FMD (Conc) will appear slight hazy and turbid with pH 3.7-4.2

Exhaust process:
40deg.C, 20-30 min (with intermittent stirring)
Dry --> Curing @ 150-160 deg.C, 2-3 min

Special Instructions:

  • If the water pH>6.2, adjust it to pH 5.8-6.2 and then use.
  • 15-20 g/l Zorofast-FMD (Conc) should appear slight hazy and turbid.
  • The prepared solution to be kept under constant stirring and to be used immediately.
  • Do not keep Zorofast-FMD (Conc) stock solution standing.
  • Ensure that the padding bath pH is 3.7-4.2 throughout the process.
  • Fabric to be treated should be free from anionic components.
  • Do not use Zorofast-FMD (Conc) in print paste.
  • Pre-lab trials are recommended with other finishing agents.
  • Absorbency of fabric should be instant. To improve absorbency of all over printed fabric (reactive/pigment), 0.2-0.5 g/l Celldet-R (wetting agent) is to be added in the finishing bath.
  • pH of the fabric should be neutral.
Note:
  1. Zorofast-FMD (Conc) when used alone gives best results
  2. Zorofast-FMD (Conc) can be used alongwith softener (Hydrosoft-142) to get desired results. Pre-lab trial with other softener is required before proceeding for bulk usage.
  3. Zorofast-FMD (Conc) can be used alongwith dye fixing agent but no softener should be added in the same bath.
  4. Exhaust process is suitable only for Package dyeing and Garment drum m/c.
  5. For garments, it is essential to cure at 150 deg.C afte exhaustion
  6. Zorofast-FMD (Conc) has limited durability to washing

Precautions

Storage: Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.

Shelf Life: 9 months from the date of manufacturing, if stored under controlled conditions.

The above information is given in good faith and is without warranty

Related Products

Product Name Short Description Description
RUBFAST-425 Wet Rubbing Fastness Improver

A specialty finishing agent to improve dry and wet rub fastness of all types of dyed and printed cotton and their blends

RUBFAST-467 Wet Rubbing Fastness Improver

A specialty finishing agent to improve dry and wet rub fastness of all types of dyed and printed cotton and their blends

ZOROFAST-FMD Wet Rubbing Fastness Improver

A specialty finishing agent to improve dry and wet rub fastness of all types of dyed and printed cotton and their blends. It is compatible with certain finishing agents. It can be applied by both dry-on-wet and wet-on-wet application.