Saracid-RS | Acid Buffer
Saracid-RS specially developed acid buffer used in dyeing and printing of polyester and its blends. Saracid-RS does not damage viscose or cotton.
Saracid-RS can be used for batch and continuous process. Addition of Saracid-RS in print paste prevents speckiness.
||Maintains pH during dyeing and printing of Disperse dyes.
||Tear strength not affected
|pH of 1% solution||3 +/- 1
|Miscibility||Readily miscible in water
|Stability||Compatible with anionic, cationic and nonionic products
|Compatibility||Stable to dilute acids and dilute alkalies.
1. Exhaust dyeing of Polyester fibre, yarn, fabric and polyester blends
Addition of 0.5 - 1.0 g/l Saracid-RS
can give desired pH 4.5-5.5 which is maintained throughout
the dyeing cycle.
2. Continuous Dyeing of Polyester
2-5 g/l Saracid-RS
in padding liquor to maintain desired pH and bath stability.
3. Polyester Printing
Addition of 0.5% - 1.0% Saracid-RS in a neutralised thickner.
Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.
Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.
The above information is given in good faith and is without warranty