Feda-SH (MOD) is a a highly effective alkali buffer for the replacement of soda ash and sodium silicate in Reactive dyeing. It requires 1/4th dosage of the soda ash during dyeing. It posses good solubility in water therefore does not give powdery deposition in machines or on roller. Due to its lower dosage in dyeing, it reduces TDS, COD, BOD load in the effluent.Feda-SH (MOD) Substitutes Sodium Silicate hence it is highly recommend for the process house which has RO treatment plant. By using Feda-SH (MOD), no white deposit are observed on machine or on mangle or glass parts on washing machine like the Silicate. With use of Feda-SH (MOD) no white deposit on mangle are observed thus less frequent grinding of roll is required. It can be applied by dosing system at 20% concentration.
Feda-SH (MOD) can be used to get best dyeing result especially when dyeing yarns; fabric by pad batch or exhaust method.
|Reduces reactive dye hydrolysis
||Enhanced colour value of dyed fabric
||Low TDS, COD and BOD value
|No Precipitation on fabric of Silicate which is used in pad-batch
||No harsh feel to fabric
|pH of 1% solution
||13 +/- 1
|Miscibility||Soluble in water
||Compatible with anionic, cationic and nonionic products
||Stable to dilute acids and dilute alkalies
Recommended dosage : 1/4th to 1/5th of soda ash dosage for all exhaust dyeing and 12.5 to 15 g/l against Sodium Silicate in Pad batch method.
Storage: Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.
Shelf Life: 9 months from the date of manufacturing, if stored under controlled conditions.
The above information is given in good faith and is without warranty