Biopol-COMBI | Biopolishing Enzyme and Peroxide Killer
Biopol-Combi is an innovative multi-component enzyme which is effective for peroxide killing and biopolishing in one stage operation. Biopol-Combi can be used for cellulosic fabric and its blends. Biopol-Combi does not show strength loss or shade changes. Biopol-Combi shortens the processing time.
As it is a neutral cellulase enzyme it will ensure a higher degree of whiteness than expected acid cellulases for full white fabric.
The product to be used in soft flow machine and garment dyeing machine.
|Multi component enzyme
||Peroxide killing and bio-polishing can be carried out after bleaching in the same bath
||No shade change in dyed material or strength loss
||Applied at wide pH
||Saving in water, time and energy|
|No stripping of optical brightness like acid cellulase
||Retain brightness of full whites
|Eliminates residual peroxide
||No shade changes during dyeing
|Stable to anionic auxiliaries & salt ( sodium sulphate/sodium chloride )
||Can be used during dyeing
||Yellow to yellowish brown liquid|
|pH of 1% solution||6 +/- 1
|Miscibility||Miscible with water
|Stability||Stable to dilute acids and dilute alkalies
|Compatibility||Not compatible with strong cationic products or anionic products
Check H2O2 residue after 15-20 min. Confirm that it should be nil and follow dyeing as per customer's dyeing procedure. During exhaustion of dye, bio-polishing will be also simultaneously taken place for 50-60 min. At the end of 50-60 min, alkali to be added where the enzyme gets deactivated and dye get fixed to the substrate or can be deactivated by increasing the temperature to 80 deg.C for 10 mins.
Storage: Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.
Shelf Life: 8 months from the date of manufacturing, if stored under controlled conditions.
The above information is given in good faith and is without warranty