SAREX CHEMICALS(A Divn. Of Saraf Chemicals Ltd.)
202 KAKAD CHAMBERS, 2ND FLOOR, 132, DR. A.B. ROAD, WORLI,
Phone : 2493 6041 2493 3818 Fax : +91 22 24964301 / 24938868 Email : sarex@vsnl.com URL : http://www.sarex.com

MSDS

PART 1. IDENTIFICATION OF SUBSTANCE / PREPARATION :

Trade Name      :   SARASIL-JS XX

Manufacturer    :   SAREX CHEMICALS

PART 2. COMPOSITION / INFORMATION ON INGREDIENTS

Finishing agent         CAS NO: Proprietory formulation

PART 3. HAZARDS IDENTIFICATION

3.1     HEALTH HAZARD DATA : Non- Hazardous

Swallowing      :   May cause irritation of the mouth, throat, and

                    esophagus.  Abdominal discomfort, nausea and

                    vomiting may occur.

Skin absorption :   No evidence of harmful effects from available

                    information.

Inhalation      :   Short-term harmful health effects are not expected

                    from vapour generated at ambient temperature.

Skin Contact    :   Brief contact is not irritating, Prolonged contact

                    causes mild to moderate local irritation. Effects may

                    be delayed,

Eye Contact     :   Causes irritation, experienced as stinging and

                    discomfort or pain excess redness and swelling of the

                    conjunctiva may occur.

PART 4. FIRST AID MEASURES

4.1 Swallowing  :   Rinse mouth and induce vomiting. However, never give

                    water or induce vomiting if victim is unconscious or

                    convulsing.

4.2 Inhalation  :   Remove to fresh air. If breathing is difficult, give

                    oxygen respiration.Seek medical attention if adverse

                    effect occurs or continues.

4.3 Skin contact:   Remove affected clothing and wash all exposed area

                    with soap and water. If irritation develops,consult

                    physician.

4.5 Notes to physician:

There is no specific antidote. Treatment of overexposure should be

directed at the control of symptoms and the clinical condition of the

patient.

PART 5. FIRE-FIGHTING MEASURES

5.1 Extinguishing media :   Carbon dioxide, dry chemical,universal foam,

                            water fog, CO2  etc.

5.2 Extinguishing media to be avoided   :   None.

5.3 Special fire fighting procedures    :   None.

5.4 Special protective equipment for

    firefighters                        :   Use self-contained breathing

                                            apparatus when fighting fires

                                            in enclosed areas.

PART 6. ACCIDENTAL RELEASE MEASURES

* Steps to be taken if material is released or spilled

* Collect for disposal.

* Wear suitable protective equipment.

PART 7. HANDLING AND STORAGE

7.1 Handling        :   General handling precautions:-Avoid contact with

                        eyes, skin and clothing. Wash thoroughly after

                        handling

Ventilation         :   General (mechanical) room ventilation is expected

                        to be satisfactory.

7.2 Storage         :   Do not store at temperatures below +4§C & above

                        40§ C

PART 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Exposure limits     :   No exposure limits have been established.

8.2 Personal protection :   Respiratory protection : -None expected to be

                            needed.

Hand

protection/protective gloves : PVC-coated

Eye protection               : Monogoggles

PART 9. PHYSICAL AND CHEMICAL PROPERTIES

Physical state              :   Liquid

Color                       :   Offwhite viscose liquid

Odour                       :   None

Molecular weight            :   Mixture

Boiling point               :   (estimated)>100 Deg C at atmospheric

                                pressure.

Freezing point              :   4+/-1 oc

Flash point                 :   >190§C

Evaporation rate (butyl acetate=1)  :   Not determined

Solubility in water (% by weigh)    :   Miscible

Percent volatiles                   :   Not determined

PART 10. STABILITY AND REACTIVITY

10.1 Stability          :   Conditions to avoid -Temperatures below +4§C &

above 40§ C

10.2 Polymerization     :   Conditions to avoid-Storage temperature above

40§ C.

PART 11. TOXICOLOGICAL INFORMATION

Non toxic

PART 12. ECOLOGICAL INFORMATION

Biodegradation              :   >70%

Eco-toxicological Effects   :   -

Ecological information      :   LD 50:>2000 mg/kg

                                LC 50:> 10 mg/l

                                Do not introduce into water and into soil

PART 13. DISPOSAL CONSIDERATIONS

Waste disposal method(s)    : Incinerate in a furnace where permitted

                              under national and local regulations.

PART 14. TRANSPORT INFORMATION

Transport information   : Not restricted by Surface/Air /Sea

PART 15. REGULATORY INFORMATION

15.1 Hazard classification  : According to eco-regulations this product is

                              not classified or labelled As hazardous

                              Protect from frost For industrial use only.

15.2 Regulatory data

All other national and local regulations, if applicable to the use,

transport or disposal of this product, should be observed

PART 16. OTHER INFORMATION

Recommended uses and restrictions: Please consult the product and/or

application information bulletins for this product.

Believes that the information contained within is accurate as at the date

hereof.  No warranty or fitness for particular purpose, warranty of

merchantability or any other warranty express or implied is made

concerning this information.  The information provided herein relates only

to the specific products described & may not valid where such product is

used in combination with any other materials or any process.  Since the

conditions & methods of use of the products are beyond the control . It

expressly disclaims any & all liability as to any results obtain or

arising from any use of the product on such information